Bnc 7000 Series Programmer Manual Manuale Utente Scaricare il pdf (Pagina 24)

The :INITiate subsystem controls the state of the SERIES 7000 trigger system. The subsystem

commands and parameters are described below. The :INITiate commands, along with the :ABORt and

:TRIGger commands, comprise the Trigger Group of commands.

Command

Parameters

Unit

(default)

Remark

:INITiate[:IMMediate]

:INITiate:CONTinuous

{ON|OFF|1|0}

OFF

:INITiate[:IMMediate]

Sets SERIES 7000 trigger to the armed state.

:INITiate:CONTinuous ON|OFF|1|0

Continuously rearms the SERIES 7000 trigger system after completion of a triggered

sweep.

5.4

:SENSe Subsystem

The SENSe command subsystem directly affects device- specific settings used to make

measurements. The SENSe subsystem is optional since this is the primary function of the instrument.

Command

Parameters

Unit

(default)

Remark

SENSe:BB:METHod

{SINGle | CC}

SENSe:MODe

{PN | TRAN | BB}

SENSe:PN:INTegrate:START

<value>

SENSe:PN:INTegrate:STOP

<value>

SENSe:PN:KPHI

<value>

rad / V

SENSe: PN:KPHI:AUTO

{ON|OFF|1|0}

SENSe: PN:KPHI;DETect

{ALWays | ONCe | NEVer}

ALWays

SENSe:PN:METHod

{SINGle | DUT | CC}

:SENSe:PN:LOBandwidth

{0.1 ~ 10k}

:SENSe:PN:LOBandwidth:AUTO

{ON|OFF|1|0}

:SENSe:PN:REFerences

{INT | EXT}

INT

:SENSe:PN:REFerences:SENS

<value>

Hz / V

:SENSe:PN:REFerences:SENS:EXECute

SENSe:FREQuency

<value>

SENSe:FREQuency:EXECute

Berkeley Nucleonics Corporation 2955 Kerner Blvd., San Rafael, CA 94901

Phone: 415-453-9955, Fax: 415-453-9956, Email: [email protected]om, Web: www.berkeleynucleonics.com

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 36 37

Commenti su questo manuale

Nessun commento

Bnc 7000 Series Programmer Manual Manuale Utente Pagina 24

Commenti su questo manuale

Prodotti e manuali riguardandi Generatori Bnc 7000 Series Programmer Manual